[ le français suit ]
Dear MSC GeoMet users,
In June 2016, we announced GeoMet-Beta which introduces new
datasets and features. We are happy to provide the MSC GeoMet
2.0.0 Migration Guide which highlights breaking changes between
the current operational version of the MSC GeoMet web services and
the major upcoming version 2.0.0 planned to replace the current
version in Spring 2017. A future announcement will provide the
specific release date.
Users are strongly invited to test potential impacts of the
upcoming changes to MSC GeoMet on their use case. The upcoming
changes can currently be tested on GeoMet-Beta.
SUMMARY OF BREAKING CHANGES
GeoMet KML:
- The GeoMet KML file is a deprecated feature. The current
GeoMet KML file is not compatible with MSC GeoMet 2.0.0. Google
Earth users can still access MSC GeoMet content in Google Earth
directly through WMS
Layer name changes:
- The following layers have changes in their names: GDPS and
RDPS at pressure levels
- The "::" in layer names is changed for a "."
- Example: the layer "RDPS.PRES_GZ::850" is now known as
"RDPS.PRES_GZ.850"
- The following layers have changes in their names: REPS.DIAG
- The ":" in layer names is changed for a "."
- The "__NALL" in layer names and labels have been removed
- Example: the layer "REPS.DIAG.6_PRMM:ERGE1__NALL" is now
known as "REPS.DIAG.6_PRMM.ERGE1"
- Several precipitation layers have their titles modified
- Layer names are the same, only titles are impacted. WMS
queries should not be impacted
- Examples:
- The GDPS.ETA_RN layer previously titled "GDPS.ETA -
Rain (QPF)" is now titled "GDPS.ETA - Rain accumulation"
- The GDPS.ETA_RT layer previously titled "GDPS.ETA -
Total precipitation rate" is now titled "GDPS.ETA -
Instantaneous precipitation rate"
Time specification:
- In the current GeoMet web services, when TIME= is specified
by the user, the latest corresponding data is provided. In MSC
GeoMet 2.0.0, the TIME= value must precisely correspond to an
available time value otherwise an error is provided to the user.
Valid TIME values are provided in the WMS GetCapabilities. This
change increases compliance of MSC GeoMet with the OGC Best
Practice for using Web Map Services (WMS) with Time-Dependent or
Elevation-Dependent Data (http://www.opengis.net/doc/bp/wms-tnz/1.0)
- Note that queries with time ranges or multiple time values
are not currently supported for WMS requests on GeoMet 2.0.0.
Single time queries are supported
Layer changes:
- Layer extents and grid points are slightly different given
the changes in the underlying source data
Visual changes:
- Layer styles (color palettes) are slightly different for all
layers
- The color interpolation in WMS tiles is different for some
layers
- Most layer legends are different
WMS GetFeatureInfo
- GetFeatureInfo responses provide updated GML and plain text
outputs. GeoJSON is now supported as well
Supported geographic projections:
- The list of supported geographic projections available in the
WMS GetCapabilities differs in MSC GeoMet 2.0.0. If you need a
specific geographic projection that is not currently supported
on GeoMet-Beta, please contact us
Vendor extensions:
- No vendor extensions from the current GeoMet web services are
currently supported in MSC GeoMet 2.0.0
- Vendor extensions are query parameters beginning with "EXT_"
Known issues:
- Some layers currently available on MSC GeoMet are not
available on GeoMet-Beta. They will be added over the coming
weeks and announced to GeoMet-Info
- Wind layers from the RDPS and HRDPS NWP models will not
display in WMS
- Layers from the GIOPS model will not display properly in WMS
Access:
Providing feedback:
- Users finding issues or discrepancies between the current
GeoMet and GeoMet-Beta not identified in this Migration Guide
are encouraged to contact us with this email address:
ec.dps-client.ec@canada.ca
Updates to this Migration Guide and the MSC GeoMet 2.0.0
implementation will be announced to the GeoMet-Info mailing list:
http://lists.ec.gc.ca/cgi-bin/mailman/listinfo/geomet-info
Sincere regards,
The GeoMet team
Chers utilisateurs de GéoMet du SMC,
En juin 2016, nous avons annoncé GéoMet-Beta qui offre de
nouveaux jeux de données et nouvelles fonctionalités. Nous sommes
heureux de vous fournir le Guide de migration vers GéoMet 2.0.0.
Ce guide identifie les changements impliquant des bris de
compatibilité entre la version opérationnelle actuelle de GéoMet
et la nouvelle version 2.0.0 qui remplacera la version actuelle au
printemps 2017. Une annonce à venir indiquera la date exacte de ce
changement.
Les usagers sont fortement invités à tester les impacts
potentiels des changements à venir des services GeoMet sur leur
propre cas d'utilisation. Ces changements peuvent dès maintenant
être testés sur GéoMet-Beta.
SOMMAIRE DES BRIS DE COMPATIBILITÉ
KML de GéoMet :
- Le fichier KML de GéoMet n'est plus une fonctionalité
supportée. Le fichier KML de GéoMet n'est pas compatible avec
GéoMet 2.0.0. Les utilisateurs de Google Earth pourront
continuer d'accéder au contenu de GeoMet dans Google Earth
directement en WMS
Changements aux identifiants des couches :
- Les identifiants des couches suivantes ont des changements
dans leurs noms : SGPD et SRPD en niveaux de pression
- Le "::" dans les identifiants de couches est changé pour
"."
- Exemple : la couche "RDPS.PRES_GZ::850" devient
dorénavant "RDPS.PRES_GZ.850"
- Les identifiants des couches suivantes ont des changements
dans leurs noms : REPS.DIAG
- Le ":" dans les identifiants de couches est changé pour
"."
- Le "__NALL" dans les identifiants et noms de couches est
retiré
- Exemple : la couche "REPS.DIAG.6_PRMM:ERGE1__NALL"
devient dorénavant "REPS.DIAG.6_PRMM.ERGE1"
- Plusieurs couches de précipitations voient leur nom changer
- Les identifiants des couches demeurent les mêmes, seuls
les titres des couches changent. Les requêtes WMS ne
devraient pas être impactés
- Exemples de changements :
- La couche GDPS.ETA_RN antérieurement intitulée
"GDPS.ETA - Pluie (QPF)" est dorénavant intitulée
"GDPS.ETA - Pluie accumulée"
- La couche GDPS.ETA_RT antérieurement intitulée
"GDPS.ETA - Taux de précipitation total" est dorénavant
intitulée "GDPS.ETA - Taux de précipitation instantané"
Spécification du temps :
- Dans les services web GéoMet actuels, lorsque TIME= est
spécifié par l'usager, la dernière donnée correspondante est
fournie. Dans GéoMet 2.0.0, la valeur spécifié avec TIME= doit
précisément correspondre à une valeur disponible, autrement, une
erreur est retournée à l'usager. Les valeurs valides pour le
paramètre TIME sont disponibles dans le GetCapabilities du
service WMS. Ce changement augmente la conformité de GéoMet du
SMC avec les pratiques exemplaires "OGC Best Practice for using
Web Map Services (WMS) with Time-Dependent or
Elevation-Dependent Data (http://www.opengis.net/doc/bp/wms-tnz/1.0)"
- Notez que les requêtes avec un intervalle de données ou
multiples valeurs de temps pour les requêtes WMS ne sont pas
présentement supportées dans GéoMet 2.0.0. Les requêtes
temporelles avec une seule valeur sont supportées
Changements aux couches :
- L'étendu spatiale et le positionnement des points de grille
est légèrement différent suite à des changements aux données
sources
Changements visuels :
- Le style des couches (palettes de couleurs) est légèrement
différent pour toutes les couches
- L'interpolation des couleurs dans les tuiles WMS est
différente pour plusieurs couches
- La majorité des légendes sont différentes
Réponse GetFeatureInfo du WMS
- Les réponses aux requêtes GetFeatureInfo en GML et texte brut
sont modifiées. Le format GeoJSON est dorénavant supporté
Support des projections cartographiques :
- La liste des projections cartographiques supportés est
disponibles dans le GetCapabilities du WMS et celle-ci diffère
des projections actuellement supportées. Si vous avez besoin du
support d'une projection spécifique qui ne serait pas supportée
par GeoMet-Beta, veuillez communiquer avec nous
Extensions de vendeur :
- Aucune des extensions de vendeur des services GeoMet actuels
ne seront supportés dans GeoMet 2.0.0
- Les extensions de vendeur sont les paramètres de requêtes
commençant par "EXT_"
Problèmes connus :
- Certaines couches présentement disponibles sur GéoMet du SMC
ne sont pas disponibles sur GéoMet-Beta. Elles seront ajoutées
au cours des prochaines semaines et seront annoncées sur
GeoMet-Info
- Les couches de barbules de vents pour les modèles SRPD et
SHRPD ne s'affiche pas en WMS
- Les couches du modèle SGPOG ne s'affiche pas correctement en
WMS
Accès :
Nous faire part de votre avis :
- Les usagers qui identifient des problèmes ou des bris de
compatibilité entre GéoMet actuel et GéoMet-Beta qui ne sont pas
mentionnés dans ce Guide de migration sont encouragés à
communiquer avec nous à cette adresse courriel :
ec.dps-client.ec@canada.ca
Les mises à jour au sujet de ce Guide de migration ainsi que
l'implémentation des services web GéoMet 2.0.0 seront annoncés sur
la liste GeoMet-Info : http://lists.ec.gc.ca/cgi-bin/mailman/listinfo/geomet-info
Cordialement,
L'équipe GéoMet
--
Data, Performance and Standards Section /
Section des Données, performance et standards
Meteorological Service of Canada /
Service météorologique du Canada
Environment Canada / Environnement Canada
ec.dps-client.ec@canada.ca