January 2023 - Hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire

by hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire＠comm.collab.science.gc.ca

Hello Zhi-Ping, I'm responsible for installing and maintaining the license server for the version of Matlab installed on the science network. We currently have 10 toolboxes available associated with this version of Matlab. Since these toolboxes are expensive to maintain, we do not have more that one or two license seats available concurrently for each toolbox. So by your logic, a user that loads Matlab should automatically reserve a seat from each of these toolboxes, which is not what is observed. From what I know, Matlab will activate (and reserve) a license seat from a toolbox when a function from that toolbox is called for the first time in a fresh Matlab session (or running a ".m" script). You can verify this activity by ssm loading (in a separate terminal session) the license server software (after having started a fresh instance of Matlab): $> . ssmuse-sh -x /fs/ssm/main/opt/matlab/matlab-lic_R2020a And then issue the command: $> lmutil lmstat -a Please note that these license server binaries (lmgrd and lmstat) only work when logged into vis.science.gc.ca or hpcr-vis.science.gc.ca (otherwise you get "no such file or directory " error). Let me know if you should need more help. Best, Sacha ( for the HPCO Helpdesk) From: hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire(a)comm.collab.science.gc.ca <hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire(a)comm.collab.science.gc.ca> Sent: January 19, 2023 2:10 AM To: hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire(a)comm.collab.science.gc.ca; Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca> Subject: [Hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire] Re: Mapping Toolbox Hi Zhi-Ping, Thank you for your email. However, it seems not a question I could address as an HPCO Partner Support Representative. The best way for solving such issue I could think of is to create an ticket here: assystNET - (UPDATED) Transfer a software license to another computer (dfo-mpo.ca)<https://can01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fassystse...> Could you give it a try there? Best Regards, Andy (Yuehua) From: hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire(a)comm.collab.science.gc.ca<mailto:hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire@comm.collab.science.gc.ca> <hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire(a)comm.collab.science.gc.ca<mailto:hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire@comm.collab.science.gc.ca>> Sent: Wednesday, January 18, 2023 4:46 PM To: Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca<mailto:William.Burrows@ec.gc.ca>> Cc: hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire(a)comm.collab.science.gc.ca<mailto:hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire@comm.collab.science.gc.ca> Subject: [Hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire] Re: Mapping Toolbox Hi Bill, I guess what happened was regardless I use it or not. When I started Matlab, the license for tooboxes are also started and became occupied by me, even if I don't use it. I copy this email to tech support to see if they can let the license run only when someone launch the function that uses specific toolbox. M_map can be downloaded at https://www.eoas.ubc.ca/~rich/map.html<https://can01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.eoa...>. You can keep downloaded code in a separate folder of your own, without administrators permission. You just need to add the directory of the m_map to your matlab paths so that Matlab can find the files in m_map. Mostly the usage of m_map is the same as Matlab Mapping Toolbox, with minor difference, such as plotm becomes m_plot in m_map; in Mapping toobox we use lat, lon, whereas in m_map, we use lon, lat. etc. Zhi-Ping From: Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca<mailto:William.Burrows@ec.gc.ca>> Sent: Wednesday, January 18, 2023 8:32 PM To: Mei, Zhi-Ping <Zhi-Ping.Mei(a)dfo-mpo.gc.ca<mailto:Zhi-Ping.Mei@dfo-mpo.gc.ca>> Subject: RE: Mapping Toolbox Thanks Zhi-Ping, I appreciate that you released the Mapping Toolbox. Unfortunately, quitting MATLAB is the only way to do it. I've never heard of m_map. Is it installed on the Science Network? Does it work the same as the Mapping Toolbox? Bill From: Mei, Zhi-Ping <Zhi-Ping.Mei(a)dfo-mpo.gc.ca<mailto:Zhi-Ping.Mei@dfo-mpo.gc.ca>> Sent: January 18, 2023 5:23 PM To: Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca<mailto:William.Burrows@ec.gc.ca>> Subject: RE: Mapping Toolbox Hi Bill, I haven't been using Mapping Toolbox for a long time because of license issue. Instead I use open source m_map. Please let me know how I can release the license to you. Zhi-Ping From: Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca<mailto:William.Burrows@ec.gc.ca>> Sent: Wednesday, January 18, 2023 8:20 PM To: Mei, Zhi-Ping <Zhi-Ping.Mei(a)dfo-mpo.gc.ca<mailto:Zhi-Ping.Mei@dfo-mpo.gc.ca>> Subject: Mapping Toolbox Hi Zhi-Ping - I'm a fellow MATLAB user on the science network. I see you have been using the Mapping Toolbox since 18:32Z. If you are finished now would you please release it? There is only 1 license unfortunately. I don't use it very often, but I would like to work on some new figures. Thanks for your consideration! Bill William (Bill) Burrows Research Scientist, Observation Based Research Section/MRD/ASTD and MSC/National Lab West Environment and Climate Change Canada / Government of Canada Eastgate Offices, 9250 - 49th Street NW Edmonton, Alberta T6B 1K5 william.burrows(a)ec.gc.ca<mailto:william.burrows@canada.ca> / Tel 780-951-8803

2 years, 3 months

1
0
0 / 0

Re: Mapping Toolbox

by hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire＠comm.collab.science.gc.ca

Thanks Simon, I did change some scripts that I called to be consistent with m_map. However, there is a possibility that I inadvertently use some functions from Mapping Toolbox that I am not aware of their origin. I will check again. In any case, anyone feel free to contact me if cases like this happen. Zhi-Ping From: St-Onge Drouin, Simon <Simon.St-OngeDrouin(a)dfo-mpo.gc.ca> Sent: Thursday, January 19, 2023 6:31 AM To: hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire(a)comm.collab.science.gc.ca; Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca>; Mei, Zhi-Ping <Zhi-Ping.Mei(a)dfo-mpo.gc.ca> Subject: RE: Mapping Toolbox Hi, Just in case you are not aware of it: as soon as you use something (a function) related to a toolbox, you are grabbing the license of this toolbox. For example, if I use “nanmean“ in my mfiles, I become a user of Statistical Toolbox (I think I is this one). My solution to this problem was to replace all functions I often use (like creating my nmean.m files, in replacement of nanmean.m). In this case, maybe Zhi-Ping there is a call to something related to the Mapping Toolbox in your scripts? Cheers, Simon De : hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire(a)comm.collab.science.gc.ca<mailto:hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire@comm.collab.science.gc.ca> <hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire(a)comm.collab.science.gc.ca<mailto:hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire@comm.collab.science.gc.ca>> Envoyé : 19 janvier 2023 02:10 À : hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire(a)comm.collab.science.gc.ca<mailto:hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire@comm.collab.science.gc.ca>; Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca<mailto:William.Burrows@ec.gc.ca>> Objet : [Hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire] Re: Mapping Toolbox Hi Zhi-Ping, Thank you for your email. However, it seems not a question I could address as an HPCO Partner Support Representative. The best way for solving such issue I could think of is to create an ticket here: assystNET - (UPDATED) Transfer a software license to another computer (dfo-mpo.ca)<https://can01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fassystse...> Could you give it a try there? Best Regards, Andy (Yuehua) From: hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire(a)comm.collab.science.gc.ca<mailto:hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire@comm.collab.science.gc.ca> <hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire(a)comm.collab.science.gc.ca<mailto:hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire@comm.collab.science.gc.ca>> Sent: Wednesday, January 18, 2023 4:46 PM To: Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca<mailto:William.Burrows@ec.gc.ca>> Cc: hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire(a)comm.collab.science.gc.ca<mailto:hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire@comm.collab.science.gc.ca> Subject: [Hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire] Re: Mapping Toolbox Hi Bill, I guess what happened was regardless I use it or not. When I started Matlab, the license for tooboxes are also started and became occupied by me, even if I don’t use it. I copy this email to tech support to see if they can let the license run only when someone launch the function that uses specific toolbox. M_map can be downloaded at https://www.eoas.ubc.ca/~rich/map.html<https://can01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.eoa...>. You can keep downloaded code in a separate folder of your own, without administrators permission. You just need to add the directory of the m_map to your matlab paths so that Matlab can find the files in m_map. Mostly the usage of m_map is the same as Matlab Mapping Toolbox, with minor difference, such as plotm becomes m_plot in m_map; in Mapping toobox we use lat, lon, whereas in m_map, we use lon, lat. etc. Zhi-Ping From: Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca<mailto:William.Burrows@ec.gc.ca>> Sent: Wednesday, January 18, 2023 8:32 PM To: Mei, Zhi-Ping <Zhi-Ping.Mei(a)dfo-mpo.gc.ca<mailto:Zhi-Ping.Mei@dfo-mpo.gc.ca>> Subject: RE: Mapping Toolbox Thanks Zhi-Ping, I appreciate that you released the Mapping Toolbox. Unfortunately, quitting MATLAB is the only way to do it. I’ve never heard of m_map. Is it installed on the Science Network? Does it work the same as the Mapping Toolbox? Bill From: Mei, Zhi-Ping <Zhi-Ping.Mei(a)dfo-mpo.gc.ca<mailto:Zhi-Ping.Mei@dfo-mpo.gc.ca>> Sent: January 18, 2023 5:23 PM To: Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca<mailto:William.Burrows@ec.gc.ca>> Subject: RE: Mapping Toolbox Hi Bill, I haven’t been using Mapping Toolbox for a long time because of license issue. Instead I use open source m_map. Please let me know how I can release the license to you. Zhi-Ping From: Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca<mailto:William.Burrows@ec.gc.ca>> Sent: Wednesday, January 18, 2023 8:20 PM To: Mei, Zhi-Ping <Zhi-Ping.Mei(a)dfo-mpo.gc.ca<mailto:Zhi-Ping.Mei@dfo-mpo.gc.ca>> Subject: Mapping Toolbox Hi Zhi-Ping – I’m a fellow MATLAB user on the science network. I see you have been using the Mapping Toolbox since 18:32Z. If you are finished now would you please release it? There is only 1 license unfortunately. I don’t use it very often, but I would like to work on some new figures. Thanks for your consideration! Bill William (Bill) Burrows Research Scientist, Observation Based Research Section/MRD/ASTD and MSC/National Lab West Environment and Climate Change Canada / Government of Canada Eastgate Offices, 9250 – 49th Street NW Edmonton, Alberta T6B 1K5 william.burrows(a)ec.gc.ca<mailto:william.burrows@canada.ca> / Tel 780-951-8803

2 years, 3 months

1
0
0 / 0

Re: Mapping Toolbox

by hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire＠comm.collab.science.gc.ca

Hi Zhi-Ping, Thank you for your email. However, it seems not a question I could address as an HPCO Partner Support Representative. The best way for solving such issue I could think of is to create an ticket here: assystNET - (UPDATED) Transfer a software license to another computer (dfo-mpo.ca)<http://assystselfservice.ent.dfo-mpo.ca/assystnet/application.jsp#service...> Could you give it a try there? Best Regards, Andy (Yuehua) From: hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire(a)comm.collab.science.gc.ca <hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire(a)comm.collab.science.gc.ca> Sent: Wednesday, January 18, 2023 4:46 PM To: Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca> Cc: hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire(a)comm.collab.science.gc.ca Subject: [Hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire] Re: Mapping Toolbox Hi Bill, I guess what happened was regardless I use it or not. When I started Matlab, the license for tooboxes are also started and became occupied by me, even if I don’t use it. I copy this email to tech support to see if they can let the license run only when someone launch the function that uses specific toolbox. M_map can be downloaded at https://www.eoas.ubc.ca/~rich/map.html<https://can01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.eoa...>. You can keep downloaded code in a separate folder of your own, without administrators permission. You just need to add the directory of the m_map to your matlab paths so that Matlab can find the files in m_map. Mostly the usage of m_map is the same as Matlab Mapping Toolbox, with minor difference, such as plotm becomes m_plot in m_map; in Mapping toobox we use lat, lon, whereas in m_map, we use lon, lat. etc. Zhi-Ping From: Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca<mailto:William.Burrows@ec.gc.ca>> Sent: Wednesday, January 18, 2023 8:32 PM To: Mei, Zhi-Ping <Zhi-Ping.Mei(a)dfo-mpo.gc.ca<mailto:Zhi-Ping.Mei@dfo-mpo.gc.ca>> Subject: RE: Mapping Toolbox Thanks Zhi-Ping, I appreciate that you released the Mapping Toolbox. Unfortunately, quitting MATLAB is the only way to do it. I’ve never heard of m_map. Is it installed on the Science Network? Does it work the same as the Mapping Toolbox? Bill From: Mei, Zhi-Ping <Zhi-Ping.Mei(a)dfo-mpo.gc.ca<mailto:Zhi-Ping.Mei@dfo-mpo.gc.ca>> Sent: January 18, 2023 5:23 PM To: Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca<mailto:William.Burrows@ec.gc.ca>> Subject: RE: Mapping Toolbox Hi Bill, I haven’t been using Mapping Toolbox for a long time because of license issue. Instead I use open source m_map. Please let me know how I can release the license to you. Zhi-Ping From: Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca<mailto:William.Burrows@ec.gc.ca>> Sent: Wednesday, January 18, 2023 8:20 PM To: Mei, Zhi-Ping <Zhi-Ping.Mei(a)dfo-mpo.gc.ca<mailto:Zhi-Ping.Mei@dfo-mpo.gc.ca>> Subject: Mapping Toolbox Hi Zhi-Ping – I’m a fellow MATLAB user on the science network. I see you have been using the Mapping Toolbox since 18:32Z. If you are finished now would you please release it? There is only 1 license unfortunately. I don’t use it very often, but I would like to work on some new figures. Thanks for your consideration! Bill William (Bill) Burrows Research Scientist, Observation Based Research Section/MRD/ASTD and MSC/National Lab West Environment and Climate Change Canada / Government of Canada Eastgate Offices, 9250 – 49th Street NW Edmonton, Alberta T6B 1K5 william.burrows(a)ec.gc.ca<mailto:william.burrows@canada.ca> / Tel 780-951-8803

2 years, 3 months

1
0
0 / 0

Re: Mapping Toolbox

by hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire＠comm.collab.science.gc.ca

Hi Bill, I guess what happened was regardless I use it or not. When I started Matlab, the license for tooboxes are also started and became occupied by me, even if I don’t use it. I copy this email to tech support to see if they can let the license run only when someone launch the function that uses specific toolbox. M_map can be downloaded at https://www.eoas.ubc.ca/~rich/map.html. You can keep downloaded code in a separate folder of your own, without administrators permission. You just need to add the directory of the m_map to your matlab paths so that Matlab can find the files in m_map. Mostly the usage of m_map is the same as Matlab Mapping Toolbox, with minor difference, such as plotm becomes m_plot in m_map; in Mapping toobox we use lat, lon, whereas in m_map, we use lon, lat. etc. Zhi-Ping From: Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca> Sent: Wednesday, January 18, 2023 8:32 PM To: Mei, Zhi-Ping <Zhi-Ping.Mei(a)dfo-mpo.gc.ca> Subject: RE: Mapping Toolbox Thanks Zhi-Ping, I appreciate that you released the Mapping Toolbox. Unfortunately, quitting MATLAB is the only way to do it. I’ve never heard of m_map. Is it installed on the Science Network? Does it work the same as the Mapping Toolbox? Bill From: Mei, Zhi-Ping <Zhi-Ping.Mei(a)dfo-mpo.gc.ca<mailto:Zhi-Ping.Mei@dfo-mpo.gc.ca>> Sent: January 18, 2023 5:23 PM To: Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca<mailto:William.Burrows@ec.gc.ca>> Subject: RE: Mapping Toolbox Hi Bill, I haven’t been using Mapping Toolbox for a long time because of license issue. Instead I use open source m_map. Please let me know how I can release the license to you. Zhi-Ping From: Burrows,William (ECCC) <William.Burrows(a)ec.gc.ca<mailto:William.Burrows@ec.gc.ca>> Sent: Wednesday, January 18, 2023 8:20 PM To: Mei, Zhi-Ping <Zhi-Ping.Mei(a)dfo-mpo.gc.ca<mailto:Zhi-Ping.Mei@dfo-mpo.gc.ca>> Subject: Mapping Toolbox Hi Zhi-Ping – I’m a fellow MATLAB user on the science network. I see you have been using the Mapping Toolbox since 18:32Z. If you are finished now would you please release it? There is only 1 license unfortunately. I don’t use it very often, but I would like to work on some new figures. Thanks for your consideration! Bill William (Bill) Burrows Research Scientist, Observation Based Research Section/MRD/ASTD and MSC/National Lab West Environment and Climate Change Canada / Government of Canada Eastgate Offices, 9250 – 49th Street NW Edmonton, Alberta T6B 1K5 william.burrows(a)ec.gc.ca<mailto:william.burrows@canada.ca> / Tel 780-951-8803

2 years, 3 months

1
0
0 / 0

Requesting help | Demande d'assistance

by hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire＠comm.collab.science.gc.ca

Hello everyone / Bonjour à tous, Please note that the procedure for requesting help has been updated: * https://portal.science.gc.ca/confluence/display/PSDFO/Contact+Information... We recommend following this procedure. Veuillez noter que la procédure pour demander d'assistance a été mis à jour: * https://portal.science.gc.ca/confluence/display/PSDFO/Contact+Information... Nous conseillons de suivre cette procédure. Thank you / Merci, Dale Support Analyst, High Performance Computing Optimization Integrated HPC Management, Shared Services Canada dale.mowbray(a)ssc-spc.gc.ca / Tel.: 514-421-4715 Analyste du soutien technique, Optimisation ordinateur haute performance Calcul de haute de performance intégré, Services partagés Canada dale.mowbray(a)ssc-spc.gc.ca / Tél.: 514-421-4715

2 years, 4 months

1
0
0 / 0

2025

2024

2023

2022

Hpco-dfo-partner-support--ochp-mpo-soutien-au-partenaire January 2023